qczlQQ 发表于 2008-10-9 10:17:32

panabit810启动出错

Load module "mgmt" ......
Load module "mbuf" ......
      jos_mbuf_minit: 64 mbuf allocated
Load module "intf" ......
Load module "em" ......
JOSEM not installed!
Load module "bsd" ......
      interface sf2 attached, mac address 00:00:D1:EE:D7:9F
      bring interface sf2 up
      interface sf3 attached, mac address 00:00:D1:EE:D7:A0
      bring interface sf3 up
Load module "ipe" ......
      ipe_minit:fail to get options
FAIL, rollback
unload module "bsd"
unload module "em"
unload module "intf"
unload module "mbuf"
unload module "mgmt"
unload module "dma"
unload module "cmds"
unload module "pci"

qczlQQ 发表于 2008-10-9 10:19:11

oad module "ipe" ......
      ipe_minit:fail to get options
FAIL, rollback
unload module "bsd"
unload module "em"
unload module "intf"
unload module "mbuf"
unload module "mgmt"
unload module "dma"
unload module "cmds"
unload module "pci"
fail to startup panaos!
Load module "pci" ......
      sf2@bus3:6:0: 0x9004:0x6915
      sf3@bus3:7:0: 0x9004:0x6915
Load module "cmds" ......
Load module "dma" ......
This is standard version, no PANAOS DMA supported!
Load module "mgmt" ......
Load module "mbuf" ......
      jos_mbuf_minit: 64 mbuf allocated
Load module "intf" ......
Load module "em" ......
JOSEM not installed!
Load module "bsd" ......
      interface sf2 attached, mac address 00:00:D1:EE:D7:9F
      bring interface sf2 up
      interface sf3 attached, mac address 00:00:D1:EE:D7:A0
      bring interface sf3 up
Load module "ipe" ......
      ipe_minit:fail to get options
FAIL, rollback
unload module "bsd"
unload module "em"
unload module "intf"
unload module "mbuf"
unload module "mgmt"
unload module "dma"
unload module "cmds"
unload module "pci"
fail to startup panaos!
Load module "pci" ......
      sf2@bus3:6:0: 0x9004:0x6915
      sf3@bus3:7:0: 0x9004:0x6915
Load module "cmds" ......
Load module "dma" ......
This is standard version, no PANAOS DMA supported!
Load module "mgmt" ......
Load module "mbuf" ......
      jos_mbuf_minit: 64 mbuf allocated
Load module "intf" ......
Load module "em" ......
JOSEM not installed!
Load module "bsd" ......
      interface sf2 attached, mac address 00:00:D1:EE:D7:9F
      bring interface sf2 up
      interface sf3 attached, mac address 00:00:D1:EE:D7:A0
      bring interface sf3 up
Load module "ipe" ......
      ipe_minit:fail to get options
FAIL, rollback
unload module "bsd"
unload module "em"
unload module "intf"
unload module "mbuf"
unload module "mgmt"
unload module "dma"
unload module "cmds"
unload module "pci"
fail to startup panaos!
Load module "pci" ......
      sf2@bus3:6:0: 0x9004:0x6915
      sf3@bus3:7:0: 0x9004:0x6915
Load module "cmds" ......
Load module "dma" ......
This is standard version, no PANAOS DMA supported!
Load module "mgmt" ......
Load module "mbuf" ......
      jos_mbuf_minit: 64 mbuf allocated
Load module "intf" ......
Load module "em" ......
JOSEM not installed!
Load module "bsd" ......
      interface sf2 attached, mac address 00:00:D1:EE:D7:9F
      bring interface sf2 up
      interface sf3 attached, mac address 00:00:D1:EE:D7:A0
      bring interface sf3 up
Load module "ipe" ......
      ipe_minit:fail to get options
FAIL, rollback
unload module "bsd"
unload module "em"
unload module "intf"
unload module "mbuf"
unload module "mgmt"
unload module "dma"
unload module "cmds"
unload module "pci"
fail to startup panaos!
Load module "pci" ......
      sf2@bus3:6:0: 0x9004:0x6915
      sf3@bus3:7:0: 0x9004:0x6915
Load module "cmds" ......
Load module "dma" ......
This is standard version, no PANAOS DMA supported!
Load module "mgmt" ......
Load module "mbuf" ......
      jos_mbuf_minit: 64 mbuf allocated
Load module "intf" ......
Load module "em" ......
JOSEM not installed!
Load module "bsd" ......
      interface sf2 attached, mac address 00:00:D1:EE:D7:9F
      bring interface sf2 up
      interface sf3 attached, mac address 00:00:D1:EE:D7:A0
      bring interface sf3 up
Load module "ipe" ......
      ipe_minit:fail to get options
FAIL, rollback
unload module "bsd"
unload module "em"
unload module "intf"
unload module "mbuf"
unload module "mgmt"
unload module "dma"
unload module "cmds"
unload module "pci"

panabit# fail to startup panaos!
Load module "pci" ......
      sf2@bus3:6:0: 0x9004:0x6915
      sf3@bus3:7:0: 0x9004:0x6915
Load module "cmds" ......
Load module "dma" ......
This is standard version, no PANAOS DMA supported!
Load module "mgmt" ......
Load module "mbuf" ......
      jos_mbuf_minit: 64 mbuf allocated
Load module "intf" ......
Load module "em" ......
JOSEM not installed!
Load module "bsd" ......
      interface sf2 attached, mac address 00:00:D1:EE:D7:9F
      bring interface sf2 up
      interface sf3 attached, mac address 00:00:D1:EE:D7:A0
      bring interface sf3 up
Load module "ipe" ......
      ipe_minit:fail to get options
FAIL, rollback
unload module "bsd"
unload module "em"
unload module "intf"
unload module "mbuf"
unload module "mgmt"
unload module "dma"
unload module "cmds"
unload module "pci"
fail to startup panaos!
Load module "pci" ......
      sf2@bus3:6:0: 0x9004:0x6915
      sf3@bus3:7:0: 0x9004:0x6915
Load module "cmds" ......
Load module "dma" ......
This is standard version, no PANAOS DMA supported!
Load module "mgmt" ......
Load module "mbuf" ......
      jos_mbuf_minit: 64 mbuf allocated
Load module "intf" ......
Load module "em" ......
JOSEM not installed!
Load module "bsd" ......
      interface sf2 attached, mac address 00:00:D1:EE:D7:9F
      bring interface sf2 up
      interface sf3 attached, mac address 00:00:D1:EE:D7:A0
      bring interface sf3 up
Load module "ipe" ......
      ipe_minit:fail to get options
FAIL, rollback
unload module "bsd"
unload module "em"
unload module "intf"
unload module "mbuf"
unload module "mgmt"
unload module "dma"
unload module "cmds"
unload module "pci"

panabit# fail to startup panaos!
Load module "pci" ......
      sf2@bus3:6:0: 0x9004:0x6915
      sf3@bus3:7:0: 0x9004:0x6915
Load module "cmds" ......
Load module "dma" ......
This is standard version, no PANAOS DMA supported!
Load module "mgmt" ......
Load module "mbuf" ......
      jos_mbuf_minit: 64 mbuf allocated
Load module "intf" ......
Load module "em" ......
JOSEM not installed!
Load module "bsd" ......
      interface sf2 attached, mac address 00:00:D1:EE:D7:9F
      bring interface sf2 up
      interface sf3 attached, mac address 00:00:D1:EE:D7:A0
      bring interface sf3 up
Load module "ipe" ......
      ipe_minit:fail to get options
FAIL, rollback
unload module "bsd"
unload module "em"
unload module "intf"
unload module "mbuf"
unload module "mgmt"
unload module "dma"
unload module "cmds"
unload module "pci"

panabit 发表于 2008-10-9 10:26:25

原帖由 qczlQQ 于 2008-10-9 10:19 发表 http://www.panabit.com/forum/images/common/back.gif
oad module "ipe" ......
      ipe_minit:fail to get options
FAIL, rollback
unload module "bsd"
unload module "em"
unload module "intf"
unload module "mbuf"
unload module "mgmt"
unload module ...

dmesg看看？
你这个是从老版本升级的，还是重新安装的？

qczlQQ 发表于 2008-10-9 10:30:05

原帖由 panabit 于 2008-10-9 10:26 发表 http://www.panabit.com/forum/images/common/back.gif


dmesg看看？
你这个是从老版本升级的，还是重新安装的？


先升级，出问题
然后安装，还是一样~!

qczlQQ 发表于 2008-10-9 10:32:49

原帖由 panabit 于 2008-10-9 10:26 发表 http://www.panabit.com/forum/images/common/back.gif


dmesg看看？
你这个是从老版本升级的，还是重新安装的？



dmesg如下:

module_register: module pci/em already exists!
Module pci/em failed to register: 17

[ 本帖最后由 qczlQQ 于 2008-10-9 10:35 编辑 ]

qczlQQ 发表于 2008-10-9 10:39:34

panabit# /usr/panabit/bin/ipectrl start
kldload: can't load /usr/panabit/kernel/if_em.ko: File exists
Warning: fail to load optimized em driver
Please recompile your kernel without em enabled!
Otherwise, you can't get the maximum performance
of panaos provides!
kern.jos.ipe_netdevices:-> sf2 sf3
net.inet.tcp.msl: 1400 -> 2000
Load module "pci" ......
      sf2@bus3:6:0: 0x9004:0x6915
      sf3@bus3:7:0: 0x9004:0x6915
Load module "cmds" ......
Load module "dma" ......
This is standard version, no PANAOS DMA supported!
Load module "mgmt" ......
Load module "mbuf" ......
      jos_mbuf_minit: 64 mbuf allocated
Load module "intf" ......
Load module "em" ......
JOSEM not installed!
Load module "bsd" ......
      interface sf2 attached, mac address 00:00:D1:EE:D7:9F
      bring interface sf2 up
      interface sf3 attached, mac address 00:00:D1:EE:D7:A0
      bring interface sf3 up
Load module "ipe" ......
Load module "watcher" ......
Load module "tbucket" ......
Load module "key" ......
Load module "keytable" ......
Load module "flow" ......
network is started!
Starting ipe_httpd ......
      flow size 64, entry size 32
Load module "node" ......
      table size 131072, pool size 131072,node size 32
Load module "xping" ......
Load module "axpgrp" ......
Load module "protocol" ......
Load module "appobj" ......
      appobj pool size 12288, entry size 32
Load module "port" ......
port module initialzied, max port 65536
Load module "localip" ......
Load module "iptable" ......
Load module "vlink" ......
Load module "policy_scheduler" ......
Load module "license" ......
ipe_httpd is started!
ipe_monitor is started!
data monitor is started!
/usr/panabit/bin/ipe_httpd: started as root without requesting chroot(), warning only
panabit# Load module "cmds" ......
Load module "dbf" ......
dbf_minit: logpath is '/usr/panalog', internal is 360
Load module "thread" ......
Load module "xping" ......
Load module "logger" ......
Load module "flow" ......
      share CPU with control plane!
Load module "config" ......
This is standard version, no license needed!
Warning: no configuration file found
Load module "josdbf" ......
panaos startup!
dbf_load: newestime 1223548249, current time 1223549408
Load module "chart" ......
PANAOS is assigning cpu 0 to thread xping
Thread xping now is running ......
PANAOS is assigning cpu 0 to thread flow
Thread flow now is running ......
flow(0x8255500) start executing...
PANAOS is assigning cpu 0 to thread logger
Thread logger now is running ......

panabit 发表于 2008-10-9 14:35:46

原帖由 qczlQQ 于 2008-10-9 10:39 发表 http://www.panabit.com/forum/images/common/back.gif
panabit# /usr/panabit/bin/ipectrl start
kldload: can't load /usr/panabit/kernel/if_em.ko: File exists
Warning: fail to load optimized em driver
Please recompile your kernel without em enabled!
Oth ...

这个看起来是正常的。

qczlQQ 发表于 2008-10-9 17:46:01

现在是正常了，
是手动的
页: [1]
查看完整版本: panabit810启动出错