Panabit不能支持我的服务器
服务器:HP DL360G3配置:Xeon 2.85 *2/1024M/37G/broadcom 5703 10/100/100M *2
操作系统:FreeBSD 6.3
安装全正常,启动出现如下错误panabit# /usr/panabit/bin/ipectrl start
kldload: can't load /usr/panabit/kernel/if_em.ko: File exists
Warning: fail to load optimized em driver
Please recompile your kernel without em enabled!
Otherwise, you can't get the maximum performance
of panaos provides!
kern.jos.ipe_netdevices: bge0 bge1 -> bge0 bge1
net.inet.tcp.msl: 2000 -> 2000
panaos is running!
network is started!
Starting ipe_httpd ......
bind: Address already in use
bind: Address already in use
/usr/panabit/bin/ipe_httpd: can't bind to any address
ipe_httpd is started!
ipe_monitor is started!
data monitor is started!
Load module "axpdesc" ......
Load module "cmds" ......
Load module "dbf" ......
dbf_minit: logpath is '/usr/panalog', internal is 360
dbf_load: newestime 0, current time 1237345265
Load module "chart" ......怀疑没有if_em.ko文件,于是查看panabit# ls -alh /usr/panabit/kernel/if_em.ko
-rwxr-xr-x1 rootwheel 97K Mar 18 10:51 /usr/panabit/kernel/if_em.ko
panabit# 重新编译一下内核吧,估计是网卡驱动不支持 原帖由 cnjustice 于 2009-3-18 11:04 发表 http://www.panabit.com/forum/images/common/back.gif
服务器:HP DL360G3
配置:Xeon 2.85 *2/1024M/37G/broadcom 5703 10/100/100M *2
操作系统:FreeBSD 6.3
安装全正常,启动出现如下错误panabit# /usr/panabit/bin/ipectrl start
kldload: can't load /usr/pana ...
你这只是一个WARNNING。
没有问题。 原帖由 panabit 于 2009-3-18 12:48 发表 http://www.panabit.com/forum/images/common/back.gif
你这只是一个WARNNING。
没有问题。
进不了管理界面呀,我用netstat -an也没有看到监听443 80之类的端口 原帖由 cnjustice 于 2009-3-18 16:38 发表 http://www.panabit.com/forum/images/common/back.gif
进不了管理界面呀,我用netstat -an也没有看到监听443 80之类的端口
你用什么浏览器?
页:
[1]