kingstarx 发表于 2009-12-16 15:33:18

PANAIBT安装问题，

FREEBSD 7.2 下安装PANABIT后，重启FREEBSD就出现这样的提示(注PANABIT一次都没启动)
libexec ld-elf.so.1: /lib/libc.so.7: mmap of entire addess space failed:Cannot allocate memeory

[ 本帖最后由 kingstarx 于 2009-12-16 15:38 编辑 ]

panabit 发表于 2009-12-16 19:05:37

原帖由 kingstarx 于 2009-12-16 15:33 发表 http://www.panabit.com/forum/images/common/back.gif
FREEBSD 7.2 下安装PANABIT后，重启FREEBSD就出现这样的提示(注PANABIT一次都没启动)
libexec ld-elf.so.1: /lib/libc.so.7: mmap of entire addess space failed:Cannot allocate memeory

你多少内存？
另外，你安装的版本对吗？

kingstarx 发表于 2009-12-17 14:10:04

原帖由 panabit 于 2009-12-16 19:05 发表 http://www.panabit.com/forum/images/common/back.gif


你多少内存？
另外，你安装的版本对吗？
开始也是当心内存小了，内存从256到512到1G都试过。版本是对的，7.2。

看了下面这段安装代码后，问题已经解决/.echo -n "Do you want to tune your system(y/n): "
read answer
[ "${answer}" = "" ] && answer="y"
if [ "${answer}" = "y" -o "${answer}" = "Y" ]; then
        new_nmbclusters=10240
        tmpfile=/var/loader.tmp
        [ -f ${tmpfile} ] && rm -f ${tmpfile}
        touch ${tmpfile}

        if [ -f /boot/loader.conf ]; then
                cat /boot/loader.conf | while read line; do
                        varname=`echo "${line}" | cut -d'=' -f1`
                        if [ "${varname}" = "kern.ipc.nmbclusters" ]; then
                                echo "kern.ipc.nmbclusters=${new_nmbclusters}" >> ${tmpfile}
                        elif [ "${varname}" = "kern.maxdsiz" ]; then
                                echo "kern.maxdsiz=2000000000" >> ${tmpfile}
                        else
                                echo "${line}" >> ${tmpfile}
                        fi
                done
        fi

        if [ "`cat ${tmpfile} | grep "kern.ipc.nmbclusters"`" = "" ]; then
                echo "kern.ipc.nmbclusters=${new_nmbclusters}" >> ${tmpfile}
        fi

        if [ "`cat ${tmpfile} | grep "kern.maxdsiz"`" = "" ]; then
                echo "kern.maxdsiz=2000000000" >> ${tmpfile}
        fi

        mv ${tmpfile} /boot/loader.conf

        echo "Your kernel configuration has been tuned as the followings:"
        echo ""
        cat /boot/loader.conf
        echo ""
        echo "You should restart your system to make they take effects."
        echo ""
        echo ""
fi

[ 本帖最后由 kingstarx 于 2009-12-18 10:45 编辑 ]
页: [1]
查看完整版本: PANAIBT安装问题，