panabit 8.05捉虫

suqianstone

我提供个下载链接给您.您等待下!下载地址如下:
http://sw.dfdkp.com.cn/panaos.core
请你测试

[ 本帖最后由 suqianstone 于 2008-5-21 10:32 编辑 ]

panabit

原帖由 suqianstone 于 2008-5-21 10:29 发表
我提供个下载链接给您.您等待下!下载地址如下:
http://sw.dfdkp.com.cn/panaos.core
请你测试

已下载！
谢谢！

panabit

你把策略2的双向分别改成单向看看？

suqianstone

p2p# more panabit.conf
sysapp app=ppstream flowttl=120 nodettl=600 cachesn=0
iptable id=1 name=<CD><F8><C2><E7><D6><D0><D0><C4>
iptable id=2 name=<B7><FE><CE><F1><C6><F7>
iprange table=1 start=219.219.0.130 end=219.219.0.190
iprange table=2 start=219.219.0.2 end=219.219.0.127
localip enable=1 ttl=1800
gbw bridge=1 in=0 out=0
gbw bridge=2 in=0 out=0
gbw bridge=3 in=0 out=0
gbw bridge=4 in=0 out=0
policygroup name=worktime
rule group=worktime id=2 app=any inip=1 outip=any dir=in action=permit next=0 iprate=0 prclevel=0 tos=0 bridge=1
rule group=worktime id=3 app=any inip=1 outip=any dir=out action=permit next=0 iprate=0 prclevel=0 tos=0 bridge=1
rule group=worktime id=100 app=p2p inip=any outip=any dir=both action=deny next=0 iprate=0 prclevel=0 tos=0 bridge=1
rule group=worktime id=101 app=nettv inip=any outip=any dir=both action=deny next=0 iprate=0 prclevel=0 tos=0 bridge=1
rule group=worktime id=102 app=pseudoie inip=any outip=any dir=both action=deny next=0 iprate=0 prclevel=0 tos=0 bridge=1
schtime id=1 disable=0 month=0 startday=1 endday=7 start=00:00:00 end=23:59:59 group=worktime
defaultgroup name=worktime
interface name=fxp0 mode=1 zone=outside
interface name=fxp1 mode=1 zone=inside
ENDCONFIG

单向是可以,经过测试.双向不行..老问题!

suqianstone

应该还是有问题.在我增加IP群组的时候,刚建立的群组消失了...

suqianstone

p2p# more /usr/panaetc/panabit.conf
sysapp app=ppstream flowttl=120 nodettl=600 cachesn=0
iptable id=1 name=<CD><F8><C2><E7><D6><D0><D0><C4>
iptable id=2 name=<B7><FE><CE><F1><C6><F7>
iprange table=1 start=219.219.0.130 end=219.219.0.190
iprange table=2 start=219.219.0.2 end=219.219.0.127
localip enable=1 ttl=1800
gbw bridge=1 in=0 out=0
gbw bridge=2 in=0 out=0
gbw bridge=3 in=0 out=0
gbw bridge=4 in=0 out=0
policygroup name=worktime
rule group=worktime id=2 app=any inip=1 outip=any dir=in action=permit next=0 iprate=0 prclevel=0 tos=0 bridge=1
rule group=worktime id=3 app=any inip=1 outip=any dir=out action=permit next=0 iprate=0 prclevel=0 tos=0 bridge=1
rule group=worktime id=100 app=p2p inip=any outip=any dir=both action=deny next=0 iprate=0 prclevel=0 tos=0 bridge=1
rule group=worktime id=101 app=nettv inip=any outip=any dir=both action=deny next=0 iprate=0 prclevel=0 tos=0 bridge=1
rule group=worktime id=102 app=pseudoie inip=any outip=any dir=both action=deny next=0 iprate=0 prclevel=0 tos=0 bridge=1
schtime id=1 disable=0 month=0 startday=1 endday=7 start=00:00:00 end=23:59:59 group=worktime
defaultgroup name=worktime
interface name=fxp0 mode=1 zone=outside
interface name=fxp1 mode=1 zone=inside
ENDCONFIG

panabit

你使用附件中的特征库看看是否解决了问题？

suqianstone

反馈:目前看一切正常,随时MSN向您反映信息!

panabit

IP群祖显示问题。

suqianstone

升级完毕,显示OK了,进一步观察!