天天来，就发个我的机器的系统信息吧

panafans

天天都来，却发现不知道说些什么好，就发个系统信息以表对panabit的支持，呵呵。

CPU：Pentium III 800EB
RAM：128M SDRAM
HDD：64M FOD
NIC：2x Rtl8139D

1. 
   
2. Copyright (c) 1992-2005 The FreeBSD Project.
   
3. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
   
4.         The Regents of the University of California. All rights reserved.
   
5. FreeBSD 4.11-RELEASE #0: Mon Oct 15 17:39:36 GMT 2007
   
6.     root@:/usr/src/sys/compile/panabit
   
7. Timecounter "i8254"  frequency 1193182 Hz
   
8. CPU: Intel Pentium III (800.43-MHz 686-class CPU)
   
9.   Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
   
10.   Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
    
11. T,PSE36,PN,MMX,FXSR,SSE>
    
12. real memory  = 133103616 (129984K bytes)
    
13. avail memory = 126017536 (123064K bytes)
    
14. Preloaded elf kernel "kernel" at 0xc0349000.
    
15. Pentium Pro MTRR support enabled
    
16. md0: Malloc disk
    
17. Using $PIR table, 4 entries at 0xc00fdec0
    
18. npx0: <math processor> on motherboard
    
19. npx0: INT 16 interface
    
20. pcib0: <Intel 82810E (i810E GMCH) Host To Hub bridge> on motherboard
    
21. pci0: <PCI bus> on pcib0
    
22. agp0: <Intel 82810E (i810E GMCH) SVGA controller> mem 0xd6000000-0xd607ffff,0xd0
    
23. 000000-0xd3ffffff irq 5 at device 1.0 on pci0
    
24. pcib1: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci0
    
25. pci1: <PCI bus> on pcib1
    
26. rl0: <RealTek 8139 10/100BaseTX> port 0xc000-0xc0ff mem 0xd5000000-0xd50000ff ir
    
27. q 5 at device 4.0 on pci1
    
28. rl0: Ethernet address: 00:0a:eb:80:01:51
    
29. miibus0: <MII bus> on rl0
    
30. rlphy0: <RealTek internal media interface> on miibus0
    
31. rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
    
32. rl1: <RealTek 8139 10/100BaseTX> port 0xc400-0xc4ff mem 0xd5001000-0xd50010ff ir
    
33. q 11 at device 5.0 on pci1
    
34. rl1: Ethernet address: 00:e0:4d:00:59:f2
    
35. miibus1: <MII bus> on rl1
    
36. rlphy1: <RealTek internal media interface> on miibus1
    
37. rlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
    
38. isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci0
    
39. isa0: <ISA bus> on isab0
    
40. atapci0: <Intel ICH ATA66 controller> port 0xf000-0xf00f at device 31.1 on pci0
    
41. ata0: at 0x1f0 irq 14 on atapci0
    
42. ata1: at 0x170 irq 15 on atapci0
    
43. pci0: <Intel 82801AA (ICH) USB controller> at 31.2 irq 9
    
44. chip1: <Intel 82801AA (ICH) AC'97 Audio Controller> port 0xdc00-0xdc3f,0xd800-0x
    
45. d8ff irq 11 at device 31.5 on pci0
    
46. orm0: <Option ROMs> at iomem 0xc0000-0xc9fff,0xcc000-0xcffff on isa0
    
47. pmtimer0 on isa0
    
48. atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
    
49. atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
    
50. device_probe_and_attach: atkbd0 attach returned 6
    
51. psm0: <PS/2 Mouse> irq 12 on atkbdc0
    
52. psm0: model Generic PS/2 mouse, device ID 0
    
53. vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
    
54. sc0: <System console> at flags 0x100 on isa0
    
55. sc0: VGA <16 virtual consoles, flags=0x300>
    
56. sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
    
57. sio0: type 16550A
    
58. sio1 at port 0x2f8-0x2ff irq 3 on isa0
    
59. sio1: type 16550A
    

复制代码

[ 本帖最后由 panafans 于 2007-11-5 16:57 编辑 ]

panabit

你怎么只运行了9天？是不是有crash？

Lucifer

使用习惯问题，用惯了windows没事就喜欢重启。用惯bsd的人估计从来都不重启。

panafans

原帖由 panabit 于 2007-11-5 17:33 发表
你怎么只运行了9天？是不是有crash？

没有，前几天这儿停过一次电，所以……

baggio

呵呵 谢谢您的反馈。